CSSLP Certified Secure Software Lifecycle Professional Questions and Answers

In an insertion attack, an IDS accepts a packet and assumes that the host computer will also accept it. But in reality, when a host system rejects the packet, the IDS accepts the attacking string that will exploit vulnerabilities in the IDS. Such attacks can badly infect IDS signatures and IDS signature analysis. Answer: B is incorrect. In this approach, an attacker sends packets in such a manner that one packet fragment overlaps data from a previous fragment. The information is organized in the packets in such a manner that when the victim's computer reassembles the packets, an attack string is executed on the victim's computer. Since the attacking string is in fragmented form, IDS is unable to detect it. Answer: C is incorrect. In this approach, an attacker sends packets in such a manner that one packet fragment overwrites data from a previous fragment. The information is organized into the packets in such a manner that when the victim's computer reassembles the packets, an attack string is executed on the victim's computer. Since the attacking string is in fragmented form, IDS becomes unable to detect it. Answer: A is incorrect. An evasion attack is one in which an IDS rejects a malicious packet but the host computer accepts it. Since an IDS has rejected it, it does not check the contents of the packet. Hence, using this technique, an attacker can exploit the host computer. In many cases, it is quite simple for an attacker to send such data packets that can easily perform evasion attacks on an IDSs.

The Bell-La Padula Model is a state machine model used for enforcing access control in government and military applications. The model is a formal state transition model of computer security policy that describes a set of access control rules which use security labels on objects and clearances for subjects. Security labels range from the most sensitive (e.g.,"Top Secret"), down to the least sensitive (e.g., "Unclassified" or "Public").

The Bell-La Padula model focuses on data confidentiality and controlled access to classified information, in contrast to the Biba Integrity Model which describes rules for the protection of data integrity. Answer: B is incorrect. The Biba model is a formal state transition system of computer security policy that describes a set of access control rules designed to ensure data integrity. Data and subjects are grouped into ordered levels of integrity. The model is designed so that subjects may not corrupt data in a level ranked higher than the subject, or be corrupted by data from a lower level than the subject. Answer: A is incorrect. The Clark-Wilson model provides a foundation for specifying and analyzing an integrity policy for a computing system. The model is primarily concerned with formalizing the notion of information integrity. Information integrity is maintained by preventing corruption of data items in a system due to either error or malicious intent. The model's enforcement and certification rules define data items and processes that provide the basis for an integrity policy. The core of the model is based on the notion of a transaction. Answer: C is incorrect. The take-grant protection model is a formal model used in the field of computer security to establish or disprove the safety of a given computer system that follows specific rules. It shows that for specific systems the question of safety is decidable in linear time, which is in general undecidable. The model represents a system as directed graph, where vertices are either subjects or objects. The edges between them are labeled and the label indicates the rights that the source of the edge has over the destination. Two rights occur in every instance of the model: take and grant. They play a special role in the graph rewriting rules describing admissible changes of the graph.

The tools that produce secure software have the following features: They decrease the exploitable flaws and weaknesses. They decrease the attack surface. They employ software security constraints, protections, and services. They reduce and restrain the propagation, extent, and damage that are caused by the behavior of insecure software. Answer: E is incorrect. This feature is not required for these tools.

The DRM (digital rights management) technology includes the following rules: 1.Compliance rule: This rule specifies the behaviors of the DRM implementation, and applications that are accessing the implementation. The compliance rule specifies the following elements: Definition of specific license rights Device requirements Revocation of license path or penalties when the implementation is not robust enough or noncompliant 2.Robustness rule: This rule has the following features: It specifies the various levels of robustness that are needed for asset security. It contains assets, such as device key, content key, algorithm, and profiling data. It specifies minimum techniques for asset security.

The Annualized Rate of Occurrence (ARO) is a number that represents the estimated frequency at which a threat is expected to occur. It is calculated based upon the probability of the event occurring and the number of employees that could make that event occur. Answer: D is incorrect. The Exposure Factor (EF) represents the % of assets loss caused by a threat. The EF is required to calculate the Single Loss Expectancy (SLE). Answer: A is incorrect. The Single Loss Expectancy (SLE) is the value in dollars that is assigned to a single event. SLE = Asset Value ($) X Exposure Factor (EF) Answer: C is incorrect. Safeguard acts as a countermeasure for reducing the risk associated with a specific threat or a group of threats.

The business continuity plan is designed to protect critical business processes from natural or man-made failures or disasters and the resultant loss of capital due to the unavailability of normal business processes. Business Continuity Planning (BCP) is the creation and validation of a practiced logistical plan for how an organization will recover and restore partially or completely interrupted critical (urgent) functions within a predetermined time after a disaster or extended disruption. The logistical plan is called a business continuity plan. Answer: C is incorrect. The crisis communication plan can be broadly defined as the plan for the exchange of information before, during, or after a crisis event. It is considered as a sub-specialty of the public relations profession that is designed to protect and defend an individual, company, or organization facing a public challenge to its reputation. The aim of crisis communication plan is to assist organizations to achieve continuity of critical business processes and information flows under crisis, disaster or event driven circumstances. Answer: A is incorrect. A contingency plan is a plan devised for a specific situation when things could go wrong. Contingency plans are often devised by governments or businesses who want to be prepared for anything that could happen. Contingency plans include specific strategies and actions to deal with specific variances to assumptions resulting in a particular problem, emergency, or state of affairs. They also include a monitoring process and "triggers" for initiating planned actions. They are required to help governments, businesses, or individuals to recover from serious incidents in the minimum time with minimum cost and disruption. Answer: D is incorrect. A disaster recovery plan should contain data, hardware, and software that can be critical for a business. It should also include the plan for sudden loss such as hard disc crash. The business should use backup and data recovery utilities to limit the loss of data.

Mandatory Access Control (MAC) is a model that uses a predefined set of access privileges for an object of the system. Access to an object is restricted on the basis of the sensitivity of the object and granted through authorization. Sensitivity of an object is defined by the label assigned to it. For example, if a user receives a copy of an object that is marked as "secret", he cannot grant permission to other users to see this object unless they have the appropriate permission. Answer: B is incorrect. DAC is an access control model. In this model, the data owner has the right to decide who can access the data. Answer: A is incorrect. Role-based access control (RBAC) is an access control model. In this model, a user can access resources according to his role in the organization. For example, a backup administrator is responsible for taking backups of important data. Therefore, he is only authorized to access this data for backing it up. However, sometimes users with different roles need to access the same resources. This situation can also be handled using the RBAC model. Answer: C is incorrect. There is no such access control model as Policy Access Control.

The following methods can be helpful to eliminate social engineering threat: Password policies Vulnerability assessments Data classification Password policy should specify that how the password can be shared. Company should implement periodic penetration and vulnerability assessments. These assessments usually consist of using known hacker tools and common hacker techniques to breach a network security. Social engineering should also be used for an accurate assessment. Since social engineers use the knowledge of others to attain information, it is essential to have a data classification model in place that all employees know and follow. Data classification assigns level of sensitivity of company information. Each classification level specifies that who can view and edit data, and how it can be shared.

Exception handling is a computer hardware mechanism or programming language construct that handles the occurrence of events. These events occur during the software execution process and interrupt the instruction flow. Exception handling performs the specific activities for managing the exceptional events.

In the pipes and filters architecture style, a device receives input from connectors and generates transformed outputs. A pipeline has a series of processing elements in which the output of each element works as an input of the next element. A little amount of buffering is provided between the two successive elements.

The public or commercial data classification is also built upon a four-level model, which are as follows: Public Sensitive Private Confidential Each level (top to bottom) represents an increasing level of sensitivity. The public level is similar to unclassified level military classification system. This level of data should not cause any damage if disclosed. Sensitive is a higher level of classification than public level data. This level of data requires a greater level of protection to maintain confidentiality. The Private level of data is intended for company use only. Disclosure of this level of data can damage the company. The Confidential level of data is considered very sensitive and is intended for internal use only. Disclosure of this level of data can cause serious damage to the company. Answer: C and E are incorrect. Unclassified and secret are the levels of military data classification.

The Department of Defense Information Assurance Certification and Accreditation Process (DIACAP) is a process defined by the United States Department of Defense (DoD) for managing risk. The Certification Determination and Accreditation phase is the third phase in the DIACAP process. Its subordinate tasks are as follows: Analyze residual risk. Issue certification determination. Make accreditation decision. Answer: A is incorrect. Phase 1 is known as Initiate and Plan IA C&A. Answer: C is incorrect. Phase 2 is used to implement and validate assigned IA controls. Answer: E is incorrect. Phase 3 is used to make certification determination and accreditation decisions. Answer: B is incorrect. Phase 5 is known as decommission system and is used to conduct activities related to the disposition of the system data and objects.

Data classification is used to protect the data based on its sensitivity, secrecy, and confidentiality. It provides security mechanisms for storage, processing, and transfer of data. Data classification also helps to verify the effort, funds, and resources allocated to save the data, and controls access to it.

The Department of Defense Information Assurance Certification and Accreditation Process (DIACAP) is a process defined by the United States Department of Defense (DoD) for managing risk. The subordinate tasks of the Implement and Validate Assigned IA Control phase in the DIACAP process are as follows: Execute and update IA implementation plan. Conduct validation activities. Combine validation results in the DIACAP scorecard. Answer: D is incorrect. The activities related to the disposition of the system data and objects are conducted in the fifth phase of the DIACAP process. The fifth phase of the DIACAP process is known as Decommission System.

Snort is an open source network intrusion prevention and detection system that operates as a network sniffer. It logs activities of the network that is matched with the predefined signatures. Signatures can be designed for a wide range of traffic, including Internet Protocol (IP), Transmission Control Protocol (TCP), User Datagram Protocol (UDP), and Internet Control Message Protocol (ICMP). The three main modes in which Snort can be configured are as follows:

Sniffer mode: It reads the packets of the network and displays them in a continuous stream on the console. Packet logger mode: It logs the packets to the disk. Network intrusion detection mode: It is the most complex and configurable configuration, allowing Snort to analyze network traffic for matches against a user-defined rule set. Answer: B is incorrect. Macof is a tool of the dsniff tool set and used to flood the local network with random MAC addresses. It causes some switches to fail open in repeating mode, and facilitates sniffing. Answer: C is incorrect. Sourcefire is the company that owns and maintains Snort. Answer: A is incorrect. NETSH is not a network intrusion detection system. NETSH is a command line tool to configure TCP/IP settings such as the IP address, Subnet Mask, Default Gateway, DNS, WINS addresses, etc.

BCP is a strategy to minimize the consequence of the instability and to allow for the continuation of business processes. The goal of BCP is to minimize the effects of a disruptive event on a company, and is formed to avoid interruptions to normal business activity. Business Continuity Planning (BCP) is the creation and validation of a practiced logistical plan for how an organization will recover and restore partially or completely interrupted critical (urgent) functions within a predetermined time after a disaster or extended disruption. The logistical plan is called a business continuity plan. Answer: B is incorrect. A contingency plan is a plan devised for a specific situation when things could go wrong. Contingency plans are often devised by governments or businesses who want to be prepared for anything that could happen. Contingency plans include specific strategies and actions to deal with specific variances to assumptions resulting in a particular problem, emergency, or state of affairs. They also include a monitoring process and "triggers" for initiating planned actions. They are required to help governments, businesses, or individuals to recover from serious incidents in the minimum time with minimum cost and disruption. Answer: C is incorrect. Disaster recovery planning is a subset of a larger process known as business continuity planning and should include planning for resumption of applications, data, hardware, communications (such as networking), and other IT infrastructure. A business continuity plan (BCP) includes planning for non-IT related aspects such as key personnel, facilities, crisis communication, and reputation protection, and should refer to the disaster recovery plan (DRP) for IT-related infrastructure recovery/continuity. Answer: A is incorrect. The Continuity Of Operation Plan (COOP) refers to the preparations and institutions maintained by the United States government, providing survival of federal government operations in the case of catastrophic events. It provides procedures and capabilities to sustain an organization's essential. COOP is the procedure documented to ensure persistent critical operations throughout any period where normal operations are unattainable.

The authorizing official is the senior manager responsible for approving the working of the information system. He is responsible for the risks of operating the information system within a known environment through the security accreditation phase. In many organizations, the authorizing official is also referred as approving/accrediting authority (DAA) or the Principal Approving Authority (PAA). Answer: C is incorrect. The system owner has the responsibility of informing the key officials within the organization of the requirements for a security C&A of the information system. He makes the resources available, and provides the relevant documents to support the process. Answer: A is incorrect. An Information System Security Officer (ISSO) plays the role of a supporter. The responsibilities of an Information System Security Officer (ISSO) are as follows: Manages the security of the information system that is slated for Certification & Accreditation (C&A). Insures the information systems configuration with the agency's information security policy. Supports the information system owner/information owner for the completion of security-related responsibilities. Takes part in the formal configuration management process. Prepares Certification & Accreditation (C&A) packages. Answer: D is incorrect. The CISO has the responsibility of carrying out the CIO's FISMA responsibilities. He manages the information security program functions.

NIST SP 800-26 (Security Self-Assessment Guide for Information Technology Systems) provides a guideline on questionnaires and checklists through which systems can be evaluated for compliance against specific control objectives. Answer: A, E, C, D, and F are incorrect. NIST has developed a suite of documents for conducting Certification & Accreditation (C&A). These documents are as follows:

NIST Special Publication 800-37: This document is a guide for the security certification and accreditation of Federal Information Systems. NIST Special Publication 800-53: This document provides a guideline for security controls for Federal Information Systems. NIST Special Publication 800-53A. This document consists of techniques and procedures for verifying the effectiveness of security controls in Federal Information System. NIST Special Publication 800-59: This document is a guideline for identifying an information system as a National Security System. NIST Special Publication 800-60: This document is a guide for mapping types of information and information systems to security objectives and risk levels.

The configuration status accounting procedure is the ability to record and report on the configuration baselines associated with each configuration item at any moment of time. It supports the functional and physical attributes of software at various points in time, and performs systematic control of accounting to the identified attributes for the purpose of maintaining software integrity and traceability throughout the software development life cycle. The configuration status and accounting process keeps track of the changes so that the latest acceptable configuration specifications are readily available. Answer: C is incorrect. The verification and audit processes seek to establish a high level of confidence in how well the Configuration Management activity is working. Answer: A is incorrect. Configuration control is a procedure of the Configuration management. Configuration control is a set of processes and approval stages required to change a configuration item's attributes and to re-baseline them. It supports the change of the functional and physical attributes of software at various points in time, and performs systematic control of changes to the identified attributes. Answer: D is incorrect. Configuration identification is the process of identifying the attributes that define every aspect of a configuration item. A configuration item is a product (hardware and/or software) that has an end-user purpose. These attributes are recorded in configuration documentation and baselined. Baselining an attribute forces formal configuration change control processes to be effected in the event that these attributes are changed.

Once the risk events have passed through qualitative risk analysis, then the risk events must be reviewed to determine the effect of the risks on the project's competing demands. Answer: D is incorrect. While the quantitative risk analysis process will review the risk events for probability and impact, this statement does not answer the question as completely as answer option A. Answer: C is incorrect. The quantitative risk analysis process does not review every risk identified - only the risks which require further analysis. Answer: B is incorrect. Quantitative risk analysis process does not begin the risk response process. Its goal is to determine the effect of certain risk events on the project's competing demands.

According to the scenario, Samantha is using the ping flood attack. In a ping flood attack, an attacker sends a large number of ICMP packets to the target computer using the ping command, i.e., ping -f target_IP_address. When the target computer receives these packets in large quantities, it does not respond and hangs. However, for such an attack to take place, the attacker must have sufficient Internet bandwidth, because if the target responds with an "ECHO reply ICMP packet" message, the attacker must have both the incoming and outgoing bandwidths available for communication. Answer: A is incorrect. In a smurf DoS attack, an attacker sends a large amount of ICMP echo request traffic to the IP broadcast addresses. These ICMP requests have a spoofed source address of the intended victim. If the routing device delivering traffic to those broadcast addresses delivers the IP broadcast to all the hosts, most of the IP addresses send an ECHO reply message. However, on a multi- access broadcast network, hundreds of computers might reply to each packet when the target network is overwhelmed by all the messages sent simultaneously. Due to this, the network becomes unable to provide services to all the messages and crashes. Answer: D is incorrect. In a teardrop attack, a series of data packets are sent to the target computer with overlapping offset field values. As a result, the target computer is unable to reassemble these packets and is forced to crash, hang, or reboot. Answer: B is incorrect. In a land attack, the attacker sends a spoofed TCP SYN packet in which the IP address of the target is filled in both the source and destination fields. On receiving the spoofed packet, the target system becomes confused and goes into a frozen state. Now-a-days, antivirus can easily detect such an attack.

The DAA, also known as Authorizing Official, makes the final accreditation decision. The Designated Approving Authority (DAA), in the United States Department of Defense, is the official with the authority to formally assume responsibility for operating a system at an acceptable level of risk. The DAA is responsible for implementing system security. The DAA can grant the accreditation and can determine that the system's risks are not at an acceptable level and the system is not ready to be operational. Answer: D is incorrect. An Information System Security Officer (ISSO) plays the role of a supporter. The responsibilities of an Information System Security Officer (ISSO) are as follows: Manages the security of the information system that is slated for Certification & Accreditation (C&A). Insures the information systems configuration with the agency's information security policy. Supports the information system owner/information owner for the completion of security-related responsibilities. Takes part in the formal configuration management process. Prepares Certification & Accreditation (C&A) packages. Answer: A is incorrect. An Information System Security Engineer (ISSE) plays the role of an advisor. The responsibilities of an Information System Security Engineer are as follows: Provides view on the continuous monitoring of the information system. Provides advice on the impacts of system changes. Takes part in the configuration management process. Takes part in the development activities that are required to implement system changes. Follows approved system changes. Answer: B is incorrect. A Chief Risk Officer (CRO) is also known as Chief Risk Management Officer (CRMO). The Chief Risk Officer or Chief Risk Management Officer of a corporation is the executive accountable for enabling the efficient and effective governance of significant risks, and related opportunities, to a business and its various segments. Risks are commonly categorized as strategic, reputational, operational, financial, or compliance-related. CRO's are accountable to the Executive Committee and The Board for enabling the business to balance risk and reward. In more complex organizations, they are generally responsible for coordinating the organization's Enterprise Risk Management (ERM) approach.

A full-interruption test includes the operations that shut down at the primary site and are shifted to the recovery site according to the disaster recovery plan. It operates just like a parallel test. The full-interruption test is very expensive and difficult to arrange. Sometimes, it causes a major disruption of operations if the test fails. Answer: A is incorrect. The structured walk-through test is also known as the table-top exercise. In structured walk-through test, the team members walkthrough the plan to identify and correct weaknesses and how they will respond to the emergency scenarios by stepping in the course of the plan. It is the most effective and competent way to identify the areas of overlap in the plan before conducting more challenging training exercises. Answer: C is incorrect. A parallel test includes the next level in the testing procedure, and relocates the employees to an alternate recovery site and implements site activation procedures. These employees present with their disaster recovery responsibilities as they would for an actual disaster. The disaster recovery sites have full responsibilities to conduct the day-to-day organization's business. Answer: D is incorrect. A simulation test is a method used to test the disaster recovery plans. It operates just like a structured walk- through test. In the simulation test, the members of a disaster recovery team present with a disaster scenario and then, discuss on appropriate responses. These suggested responses are measured and some of them are taken by the team. The range of the simulation test should be defined carefully for avoiding excessive disruption of normal business activities.

ISO 27004 is an information security standard developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It is entitled as "Information technology - Security techniques - Information security management - Measurement". The ISO 27004 standard provides guidelines on specifications and use of measurement techniques for the assessment of the effectiveness of an implemented information security management system and controls. It also helps an organization in establishing the effectiveness of ISMS implementation, embracing benchmarking, and performance targeting within the PDCA (plan-do-check-act) cycle. Answer: A is incorrect. ISO 27003 is entitled as "Information Technology - Security techniques - Information security management system implementation guidance". Answer: B is incorrect. ISO 27005 is entitled as "ISO/IEC 27005:2008 Information technology -- Security techniques -- Information security risk management". Answer: D is incorrect. ISO 27006 is entitled as "Information technology - Security techniques - Requirements for bodies providing audit and certification of information security management systems".

Confidentiality is a term that refers to the protection of data against unauthorized access. Administrators can provide confidentiality by encrypting data. Symmetric encryption is a relatively fast encryption method. Hence, this method of encryption is best suited for encrypting large amounts of data such as files on a computer. Answer: A is incorrect. Integrity ensures that no intentional or unintentional unauthorized modification is made to data. Answer: C is incorrect. Auditing is used to track user accounts for file and object access, logon attempts, system shutdown etc. This enhances the security of the network. Before enabling auditing, the type of event to be audited should be specified in the Audit Policy in User Manager for Domains.

Top-Down Approach is an approach to build a security program. The initiation, support, and direction come from the top management and work their way through middle management and then to staff members. It is treated as the best approach. This approach ensures that the senior management, who is ultimately responsible for protecting the company assets, is driving the program. Bottom-Up Approach is an approach to build a security program. The lower-end team comes up with a security control or a program without proper management support and direction. It is less effective and doomed to fail. Answer: A and B are incorrect. No such types of approaches exist

Role-based access control (RBAC) is an access control model. In this model, a user can access resources according to his role in the organization. For example, a backup administrator is responsible for taking backups of important data. Therefore, he is only authorized to access this data for backing it up. However, sometimes users with different roles need to access the same resources. This situation can also be handled using the RBAC model. Answer: B is incorrect. Mandatory Access Control (MAC) is a model that uses a predefined set of access privileges for an object of the system. Access to an object is restricted on the basis of the sensitivity of the object and granted through authorization. Sensitivity of an object is defined by the label assigned to it. For example, if a user receives a copy of an object that is marked as "secret", he cannot grant permission to other users to see this object unless they have the appropriate permission. Answer: A is incorrect. DAC is an access control model. In this model, the data owner has the right to decide who can access the data. This model is commonly used in PC environment. The basis of this model is the use of Access Control List (ACL). Answer: C is incorrect. There is no such access control model as Policy Access Control.

NIACAP accreditation is of three types depending on what is being certified. They are as follows: 1.Site accreditation: This type of accreditation evaluates the applications and systems at a specific, self contained location. 2.Type accreditation: This type of accreditation evaluates an application or system that is distributed to a number of different locations. 3.System accreditation: This accreditation evaluates a major application or general support system. Answer: C is incorrect. No such type of NIACAP accreditation exists.

This is a type of service-level agreement. A service-level agreement (SLA) is a negotiated agreement between two parties where one is the customer and the other is the service provider. It records a common understanding about services, priorities, responsibilities, guarantees, and warranties. Each area of service scope should have the 'level of service' defined. The SLA may specify the levels of availability, serviceability, performance, operation, or other attributes of the service, such as billing. Answer: C is incorrect. Non-disclosure agreements (NDAs) are often used to protect the confidentiality of an invention as it is being evaluated by potential licensees. Answer: D is incorrect. License agreements (LA) describe the rights and responsibilities of a party related to the use and exploitation of intellectual property. Answer: B is incorrect. There is no such type of agreement as VPN.

NIST has developed a suite of documents for conducting Certification & Accreditation (C&A). These documents are as follows: NIST Special Publication 800-37: This document is a guide for the security certification and accreditation of Federal Information Systems. NIST Special Publication 800-53: This document provides a guideline for security controls for Federal Information Systems. NIST Special Publication 800-53A. This document consists of techniques and procedures for verifying the effectiveness of security controls in Federal Information System. NIST Special Publication 800-59: This document is a guideline for identifying an information system as a National Security System. NIST Special Publication 800-60: This document is a guide for mapping types of information and information systems to security objectives and risk levels. Answer: C is incorrect. There is no such type of NIST document.

There are four risk responses available for a negative risk event. The risk response strategies for negative risks are: Avoid: It involves altering the project management plan to remove the threats completely. Transfer: It requires shifting some or all of the negative effects of a threat including the ownership of response, to a third party. Mitigate: It implies a drop in the probability and impact of an unfavorable risk event to be within suitable threshold limits. Accept: It delineates that the project plan will not be changed to deal with the risk. Management may develop a contingency plan if the risk occurs. It is used for both negative and positive risks. Answer: C is incorrect. There are four responses for negative risk events. Answer: A is incorrect. There are four, not three, responses for negative risk events. Do not forget that acceptance can be used for negative risk events. Answer: B is incorrect. There are seven total risk responses, four of which can be used for negative risk events.

Security Test and Evaluation (ST&E) is a component of risk assessment. It is useful in discovering system vulnerabilities. According to NIST SP 800-42 (Guideline on Network Security Testing), ST&E is used for the following purposes: To assess the degree of consistency between the system documentation and its implementation To determine the adequacy of security mechanisms, assurances, and other properties to enforce the security policy To uncover design, implementation, and operational flaws that may allow the violation of security policy Answer: A is incorrect. ST&E is not used for the implementation of the system architecture.

DITSCAP stands for DoD Information Technology Security Certification and Accreditation Process. The DoD Directive 5200.40 (DoD Information Technology Security Certification and Accreditation Process) established the DITSCAP as the standard C&A process for the Department of Defense. The Department of Defense Information Assurance Certification and Accreditation Process (DIACAP) is a process defined by the United States Department of Defense (DoD) for managing risk. DIACAP replaced the former process, known as DITSCAP, in 2006. Answer: B is incorrect. This DoD Directive is known as National Industrial Security Program Operating Manual. Answer: C is incorrect. This DoD Directive is known as Defense Information Management (IM) Program. Answer: A is incorrect. This DoD Directive is known as Management and Control of Information Requirements.

Integration testing is a software testing that seeks to verify the interfaces between components against a software design. Software components may be integrated in an iterative way or all together ("big bang"). Normally the former is considered a better practice since it allows interface issues to be localized more quickly and fixed. Integration testing works to expose defects in the interfaces and interaction between the integrated components (modules). Progressively larger groups of tested software components corresponding to elements of the architectural design are integrated and tested until the software works as a system. Answer: A is incorrect. Regression testing focuses on finding defects after a major code change has occurred. Specifically, it seeks to uncover software regressions, or old bugs that have come back. Such regressions occur whenever software functionality that was previously working correctly stops working as intended. Typically, regressions occur as an unintended consequence of program changes, when the newly developed part of the software collides with the previously existing code. Answer: D is incorrect. Unit testing refers to tests that verify the functionality of a specific section of code, usually at the function level. In an object-oriented environment, this is usually at the class level, and the minimal unit tests include the constructors and destructors. These types of tests are usually written by developers as they work on code (white-box style), to ensure that the specific function is working as expected. One function might have multiple tests, to catch corner cases or other branches in the code. Unit testing alone cannot verify the functionality of a piece of software, but rather is used to assure that the building blocks the software uses work independently of each other. Answer: C is incorrect. The black-box testing uses external descriptions of the software, including specifications, requirements, and design to derive test cases. These tests can be functional or non-functional, though usually functional. The test designer selects valid and invalid inputs and determines the correct output. There is no knowledge of the test object's internal structure. This method of test design is applicable to all levels of software testing: unit, integration, functional testing, system and acceptance. The higher the level, and hence the bigger and more complex the box, the more one is forced to use black box testing to simplify. While this method can uncover unimplemented parts of the specification, one cannot be sure that all existent paths are tested.

The residual risk is the risk or danger of an action or an event, a method or a (technical) process that still conceives these dangers even if all theoretically possible safety measures would be applied. The formula to calculate residual risk is (inherent risk) x (control risk) where inherent risk is (threats vulnerability). Answer: B is incorrect. In information security, security risks are considered as an indicator of threats coupled with vulnerability. In other words, security risk is a probabilistic function of a given threat agent exercising a particular vulnerability and the impact of that risk on the organization. Security risks can be mitigated by reviewing and taking responsible actions based on possible risks. Answer: C is incorrect. Vulnerability is a weakness or lack of safeguard that can be exploited by a threat, thus causing harm to the information systems or networks. It can exist in hardware , operating systems, firmware, applications, and configuration files. Vulnerability has been variously defined in the current context as follows: 1.A security weakness in a Target of Evaluation due to failures in analysis, design, implementation, or operation and such. 2.Weakness in an information system or components (e.g. system security procedures, hardware design, or internal controls that could be exploited to produce an information-related misfortune.) 3.The existence of a weakness, design, or implementation error that can lead to an unexpected, undesirable event compromising the security of the system, network, application, or protocol involved.

This is an example of the avoidance risk response. Because the project plan has been changed to avoid the risk event, so it is considered the avoidance risk response. Risk avoidance is a technique used for threats. It creates changes to the project management plan that are meant to either eliminate the risk completely or to protect the project objectives from its impact. Risk avoidance removes the risk event entirely either by adding additional steps to avoid the event or reducing the project scope requirements. It may seem the answer to all possible risks, but avoiding risks also means losing out on the potential gains that accepting (retaining) the risk might have allowed. Answer: C is incorrect. Acceptance is when the stakeholders acknowledge the risk event and they accept that the event could happen and could have an impact on the project. Acceptance is usually used for risk events that have low risk exposure or risk events in which the project has no control, such as a pending law or weather threats. Answer: A is incorrect. Mitigation is involved with the actions to reduce an included risk's probability and/or impact on the project's objectives. As the risk was removed from the project, this scenario describes avoidance, not mitigation. Answer: B is incorrect. Transference is when the risk is still within the project, but the ownership and management of the risk event is transferred to a third party - usually for a fee.

This is an example of transference as you have transferred the risk to a third party. Transference almost always is done with a negative risk event and it usually requires a contractual relationship.

The various DoD directives are as follows:

DoD 5200.1-R: This DoD directive refers to the 'Information Security Program Regulation'. DoD 5200.22-M: This DoD directive refers the 'National Industrial Security Program Operating Manual'. DoD 7950.1-M: This DoD directive refers to the 'Defense Automation Resources Management Manual'. DoDD 8000.1: This DoD directive refers to the 'Defense Information Management (IM) Program'. DoD 8910.1: This DoD directive refers to the 'Management and Control of Information Requirements'.

Security guards, locks on the gates, and alarms come under physical access control. Policies and procedures implemented by an organization come under administrative access control. IDS systems, encryption, network segmentation, and antivirus controls come under technical access control. Answer: D is incorrect. There is no such type of access control as automatic control.

John will perform OS fingerprinting on the We-are-secure network. Fingerprinting is the easiest way to detect the Operating System (OS) of a remote system. OS detection is important because, after knowing the target system's OS, it becomes easier to hack into the system. The comparison of data packets that are sent by the target system is done by fingerprinting. The analysis of data packets gives the attacker a hint as to which operating system is being used by the remote system. There are two types of fingerprinting techniques as follows: 1.Active fingerprinting 2.Passive fingerprinting In active fingerprinting ICMP messages are sent to the target system and the response message of the target system shows which OS is being used by the remote system. In passive fingerprinting the number of hops reveals the OS of the remote system. Answer: D and B are incorrect. John should perform OS fingerprinting first, after which it will be easy to identify which services are running on the network since there are many services that run only on a specific operating system. After performing OS fingerprinting, John should perform networking mapping. Answer: C is incorrect. This is a pre-attack phase, and only after gathering all relevant knowledge of a network should John install a backdoor.

The credit card issuing company has violated the Privacy law. According to the Internet Privacy law, a company cannot provide their customer's financial and personal details to other companies. Answer: A is incorrect. Trademark laws facilitate the protection of trademarks around the world. Answer: B is incorrect. There is no law such as Security law. Answer: D is incorrect. The Copyright law protects original works or creations of authorship including literary, dramatic, musical, artistic, and certain other intellectual works.

The potential impact is called low if the loss of confidentiality, integrity, or availability is expected to have a limited adverse effect on organizational operations, organizational assets, or individuals. Answer: C is incorrect. Such a type of potential impact level does not exist Answer: A is incorrect. The potential impact is known to be moderate if the loss of confidentiality, integrity, or availability is expected to have a serious adverse effect on organizational operations, organizational assets, or individuals. Answer: D is incorrect. The potential impact is called high if the loss of confidentiality, integrity, or availability is expected to have a severe or catastrophic adverse effect on organizational operations, organizational assets, or individuals.

2Mosaic is a tool used for watermark breaking. It is an attack against a digital watermarking system. In this type of attack, an image is chopped into small pieces and then placed together. When this image is embedded into a web page, the web browser renders the small pieces into one image. This image looks like a real image with no watermark in it. This attack is successful, as it is impossible to read watermark in very small pieces. Answer: D is incorrect. Gifshuffle is used to hide message or information inside GIF images. It is done by shuffling the colormap. This tool also provides compression and encryption. Answer: B and A are incorrect. Active Attacks and Steg-Only Attacks are used to attack Steganography.

The Phase 1 of DITSCAP C&A is known as Definition Phase. The goal of this phase is to define the C&A level of effort, identify the main C&A roles and responsibilities, and create an agreement on the method for implementing the security requirements. The Phase 1 starts with the input of the mission need. This phase comprises three process activities: Document mission need Registration Negotiation Answer: D is incorrect. Initial Certification Analysis is a Phase 2 activity.

Password propagation provides an alternative by requiring that a user's authentication credentials be verified by the database before providing access to that user's data. Answer: D is incorrect. Account lockout implements a limit on the incorrect password attempts to protect an account from automated password-guessing attacks. Answer: B is incorrect. Authenticated session allows a user to access more than one access-restricted Web page without re-authenticating every page. It also integrates user authentication into the basic session model. Answer: A is incorrect. Secure assertion distributes application-specific sanity checks throughout the system.

The DAA issues one of the following four accreditation determinations: Approval to Operate (ATO): It is an authorization of a DoD information system to process, store, or transmit information. Interim Approval to Operate (IATO): It is a temporary approval to operate based on an assessment of the implementation status of the assigned IA Controls. Interim Approval to Test (IATT): It is a temporary approval to conduct system testing based on an assessment of the implementation status of the assigned IA Controls. Denial of Approval to Operate (DATO): It is a determination that a DoD information system cannot operate because of an inadequate IA design or failure to implement assigned IA Controls. Answer: E is incorrect. No such type of accreditation determination exists.

Of all the choices only this answer is accurate. The PMBOK clearly states that the data must be accurate and unbiased to be credible. Answer: D is incorrect. This is not a valid statement about the qualitative risk analysis data. Answer: A is incorrect. This is not a valid statement about the qualitative risk analysis data. Answer: B is incorrect. This is not a valid statement about the qualitative risk analysis data.

The change management system is comprised of several components that guide the change request through the process. When a change request is made that will affect the project scope. The Configuration Management System evaluates the change request and documents the features and functions of the change on the project scope.

A code review is a systematic examination of computer source code, which searches and resolves issues occurred in the initial development phase. It increases the software security by removing common vulnerabilities, such as format string exploits, race conditions, memory leaks, and buffer overflows. A code review is performed in the following forms: Pair programming Informal walkthrough Formal inspection Answer: C is incorrect. A peer review is an examination process in which author and one or more colleagues examine a work product, such as document, code, etc., and evaluate technical content and quality. According to the Capability Maturity Model, peer review offers a systematic engineering practice in order to detect and resolve issues occurring in the software artifacts, and stops the leakage into field operations. Answer: A is incorrect. Management review is a management study into a project's status and allocation of resources. Answer: D is incorrect. In software audit review one or more auditors, who are not members of the software development organization, perform an independent examination of a software product, software process, or a set of software processes for assessing compliance with specifications, standards, contractual agreements, or other specifications.