A10-System-Administration A10 Certified Professional System Administration 4 Questions and Answers

Three devices were configured as part of the virtual chassis.

The command was run from the aVCS vMaster.

The aVCS vMaster of the group can always be accessed at IP Address 1.0.0.1.

The aVCS vMaster of the set can always be accessed at IP Address 224.0.0.210.

The command was run from device 3 of the set.

This is aVCS set-id 1.

HA Sync needs to be done

VRRP-A should be failed over

Automatically

aVCS reload has to be performed

Any Thunder series devices can be clustered together in an aVCS set

Devices must be the same model but can have different optional hardware cards

Devices must be the same model and have the same optional hardware cards

The command is ignored when the current vMaster is in vMaster maintenance mode.

Any subsequent vmaster-take-over command within the chassis with a parameter smaller than 201 is ignored.

The 200 priority is compared to the current vmaster’s default vrid priority to determine which device controls the chassis.

If an administrator on vBlade B were to simultaneously issue command vcs vmaster-take-over 210, vBlade B would become the vMaster.

reload

restore

system-reset

shutdown –r

restart

reboot

Enabling VRRP-A requires that aVCS is operational

Enabling aVCS require VRRP-A is operational

VRRP-A and aVCS operate independently of each other

VRRP-A and aVCS must function simultaneously