Winter Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: geek65

D-VXR-DY-23 Dell VxRail Deploy 2023 Questions and Answers

Questions 4

Use the VxRail simulator to explore the system. What is the presented configuration?

Note: It fs necessary to close (x) the simulator window before you can select a response to this question.

Options:

A.

Internal vCenter and external DNS

B.

Internal vCenter and Internal DNS

C.

External vCenter and external DNS

D.

External vCenter and internal DNS

Buy Now
Questions 5

Which command can be used from the VxRail Manager VM to restart the loudmouth daemon?

Options:

A.

systemctl restart loudmouth

B.

/usr/lib/vmware/loudmouth/bin/loudmouthd restart

C.

/etc/init.d/loudmouth restart

D.

systemctl restart vmware-loudmouth

Buy Now
Questions 6

Which requirement must be met when expanding a 3-node VxRail G560F cluster with a fourth G Series node in the same chassis?

Options:

A.

PCIe network card must be added to all nodes

B.

Node requires only the same drive configuration

C.

Node hardware must be identical to the other three nodes

D.

New node must be at the same VxRail version as existing nodes

Buy Now
Questions 7

An implementation engineer is deploying a new VxRail cluster. What should they confirm before installing the hardware?

Options:

A.

Service laptop must be on the same IP network as the iDRACs

B.

At least 36 in (92 cm) clearance exists in front of and behind the cabinet

C.

Power distribution must support the power rating of a single node

D.

Single power zone must be used with adequate power cables

Buy Now
Questions 8

An implementation engineer places a VxRail node into maintenance mode using the Ensure accessibility setting What is the engineer likely planning to do?

Options:

A.

Extensive maintenance

B.

Temporary maintenance

C.

Permanent removal of host from cluster

D.

Shutdown of an entire cluster

Buy Now
Questions 9

A VxRail cluster is being deployed in a DMZ environment. What is the recommended deployment option?

Options:

A.

External vCenter Server with customer-supplied VDS

B.

External vCenter Server with VxRail-deployed VDS

C.

Internal vCenter Server with internal DNS

D.

Internal vCenter Server with external DNS

Buy Now
Questions 10

What is a characteristic of the VxRail S Series node?

Options:

A.

Form factor of 2U4N

B.

Large form factor drives

C.

Dense Flash disks

D.

Form factor of 1U1N

Buy Now
Questions 11

What is the correct CLI command to collect only the vCenter logs on VxRail Manager

Options:

A.

vc-support.sh –v

B.

generateFullBundle.py –v

C.

vc-support-bundle.sh –c

D.

generateLogBundle.py –c

Buy Now
Questions 12

An implementation engineer is performing a precheck on a VxRail cluster before expansion. During validation, they find out that the host is not compatible.

Use the VxRail simulator to describe why the host is Incompatible.

Note: It is necessary to close (x) the simulator window before you can select a response to this question.

Options:

A.

bmc and bios are running older versions

B.

Insufficient number of vSphere licenses

C.

Firmware of ESXi host needs to be updated

D.

Invalid vCenter 5erver license

Buy Now
Questions 13

Where can an administrator find steps to perform a manual verification of the customer network?

Options:

A.

Customer Simplified Form

B.

Dell EMC VxRail Network Planning Guide

C.

Pre-Engagement Questionnaire (PEQ)

D.

Dell Technologies SolVe Online

Buy Now
Questions 14

For which typical activity would the Full data migration setting be used when placing a VxRail host into maintenance mode?

Options:

A.

Temporary maintenance

B.

Rebooting a single ESXi host

C.

Shutting down an entire cluster

D.

Permanently removing host from cluster

Buy Now
Questions 15

What is the minimum number of VxRail nodes required for a vSAN storage policy with RAID-5 (Erasure Coding)?

Options:

A.

3

B.

4

C.

5

D.

6

Buy Now
Questions 16

What code is returned when a VxRail API request is executed successfully?

Options:

A.

200

B.

207

C.

400

D.

500

Buy Now
Questions 17

What is a consideration when expanding a VxRail cluster? (Choose two.)

Options:

A.

Mixing of All-Flash and all-NVMe nodes in a cluster is not allowed

B.

Expanding a cluster to 64 nodes requires a 25 GbE network

C.

G Series clusters can be expanded only with G Series nodes

D.

1 GbE must be hybrid and single processor node type

Buy Now
Questions 18

How should an administrator manually validate the DNS readiness of a customer network?

Options:

A.

Run a traceroute to the DNS server

B.

Generate a Network PEQ

C.

Ping the default gateway of the management VLAN

D.

Run nslookup on server FQDN and IP

Buy Now
Questions 19

A systems engineer is deploying a VxRail cluster. They want to ensure that configuration issues can be avoided when expanding this cluster.

Which actions need to be performed?

Options:

A.

Verify VxRail nodes are racked and connected to the ToR switches

Validate the network environment

B.

Validate that no pending and unfinished jobs are running on the servers

Verify that the server and storage components are working properly

C.

Validate that the latest updates and patches are installed in the system

Validate that no pending and unfinished jobs are running on the servers

D.

Verify the configuration settings initially captured in PEQ

Validate the storage environment

Buy Now
Questions 20

Which service determines the primary node after powering on the VxRail nodes during the deployment of a VxRail cluster?

Options:

A.

Loudmouth

B.

Election

C.

Marvin

D.

Mystic

Buy Now
Questions 21

What data protection option is included with VxRail?

Options:

A.

vSphere Replication NetWorker

B.

PowerProtect Software Data Domain Cloud Tier

C.

RecoverPoint for VM vSphere Replication

D.

RecoverPoint for VM Avamar

Buy Now
Questions 22

What is the minimum number of VxRail nodes required for a vSAN storage policy with RAID-6 (Erasure Coding)?

Options:

A.

4

B.

5

C.

6

D.

7

Buy Now
Questions 23

A VxRail Test Plan has been completed What is the protocol for recording the results'?

Options:

A.

With the implementation team, complete and document each test, test date, and a screenshot of results

B.

In front of a customer, complete each test and document the test date

C.

With the implementation team, complete each test and document the test date

D.

In front of a customer, complete and document each test, test date, and a screenshot of results

Buy Now
Questions 24

For which VxRail models must the iDRAC NIC Selection be set to Dedicated?

Options:

A.

D, G, P, S, and V Series

B.

E, P, S, and V Series only

C.

D, E, P, S, and V Series

D.

D, E, and G Series

Buy Now
Questions 25

During the activation of Internal SRS, the implementation engineer receives a message that the deployment has failed What is a possible cause?

Options:

A.

SRS VE Gateway on the same subnet as the VxRail Manager

B.

VxRail status already set to installed' in IB database

C.

Site ID mismatch between the IB database and the SRS Wizard

D.

Witness Gateway not configured following Dell best practices

Buy Now
Questions 26

According to the VxRail PEQ Engagement Details worksheet, links to what resources should the SE send to the customer?

Options:

A.

VxRail vCenter Server Planning Guide

Network Validation Tool

B.

VxRail vCenter Server Planning Guide

VxRail Network Planning Guide

C.

VxRail QuickStart Guide

VxRail Network Planning Guide

D.

VxRail QuickStart Guide

Network Validation Tool

Buy Now
Questions 27

Which vCenter object is created automatically when deploying VxRail with an external vCenter Server?

Options:

A.

Resource Pool

B.

Cluster

C.

Datacenter

D.

VxRail Management user account

Buy Now
Questions 28

In a VxRail Stretched Cluster deployment of 8 nodes on between sites?

Options:

A.

Primary to Witness site RTT: < 250 ms Secondary to Witness site RTT; < 250 ms Primary to Secondary site RTT: < 5 ms

B.

Primary to Witness site RTT: < 150 ms Secondary to Witness site RTT: < 150 ms Primary to Secondary site RTT: < 10 ms

C.

Primary to Witness site RTT: < 200 ms Secondary to Witness site RTT: < 200 ms Primary to Secondary site RTT: <: 5 ms

D.

Primary to Witness site RTT: < 200 ms Secondary to Witness site RTT < 200 ms Primary to Secondary site RTT: < 10 ms

Buy Now
Questions 29

What is a valid 2-node VxRail cluster configuration?

Options:

A.

Series with 4x 25 GbE in a direct-connect configuration

B.

Series with 4x 10 GbE in a switch configuration

C.

Series with 4x 1 GbE in a direct-connect configuration

D.

Series with 2x 25 GbE in a switch configuration

Buy Now
Questions 30

What is a benefit of using the VxRail REST API?

Options:

A.

Remote upgrades of iDRAC related software only

B.

Automated security audit of VxRail clusters

C.

Automated log collection for VxRail clusters

D.

Polling for vSAN performance statistics

Buy Now
Exam Code: D-VXR-DY-23
Exam Name: Dell VxRail Deploy 2023
Last Update: Feb 10, 2026
Questions: 102
D-VXR-DY-23 pdf

D-VXR-DY-23 PDF

$29.75  $84.99
 Add to Cart
D-VXR-DY-23 Engine

D-VXR-DY-23 Testing Engine

$35  $99.99
 Add to Cart
D-VXR-DY-23 PDF + Engine

D-VXR-DY-23 PDF + Testing Engine

$47.25  $134.99
 Add to Cart