clapgeek logo
When analyzing a large (100GB, for example) trace file within Cascade Pilot, you should:
What are the two (at a minimum) devices you need to configure in Cascade Profiler for Switch Port Discovery integration to work for a portion of the network?
What is the Active Timeout requirement on flow sources sending NetFlow to Cascade?
Company X wants to use Cascade for monitoring the performance of their SQL application to all remote sites before considering purchasing any WAN optimization technology. They would like to add a Cascade Sensor to their network, and therefore they must:
Which of the following are true about Trend/Index data on a Cascade Shark appliancE. (Select 3)
When designing a Cascade deployment which of the following is important to consider about sizing?
In order for the Cascade solution to track an application based on its fingerprint, data can be used from which devices? (Select 3)
Common methods for receiving alerts from a Network Performance Management system includE. (select 2)
Which Cascade device is capable of sending flow data to more than one Cascade Profiler? (Select 3)
Which of the following is false in regards to Cascade Profiler reporting and alerting? (Select 2)
When the Discovery wizard presents all newly discovered application-ports as candidates to be included as segments for monitoring within a Service, which of the following actions will save the segment as part of the Service, but will not implement monitoring of the traffic? This action will also suppress the same application-ports from being presented in any future discovery.
Which of the following will result in RTT values not being available for a flow? (Select 2)
On the Cascade Shark Appliance, which User Groups on the appliance exist by default:
WAN optimization reports on Cascade Profiler require that the WAN interfaces for all Steelheads performing optimization are included in a WAN Interface group and are marked as Steelhead interfaces. Which of the following is true?
What is one way Cascade obtains information about retransmissions in the network?
Within Cascade Pilot, a tool tip is available to provide additional information about items such as views. To access the tool tip for a view you must:
Which of the following are default user-defined policies on Cascade Profiler? (Select 3)
Cascade Shark can export flow data to a Cascade Profiler. When configuring Cascade Shark, flow export can be configured:
In Cascade Profiler, what is the minimum amount of historical flow data required for an Application Performance analytic to initialize?
What is a benefit that Cascade Profiler might provide to Security Operations? (Select 3)
Which of the following are TRUE concerning packet capture jobs on the Cascade Shark appliancE. (Select 4)
When creating an analytic service, the discovery process requires a minimum of:
In the Cascade Profiler Dashboard GUI, what types of content blocks can you create? (Select 4)
How do I run a report on Cascade Profiler to show all hosts that have talked to server "192.168.1.100" on TCP port 25?
In this scenario, you have created a host group called My_Computers on Cascade Profiler. In that group you have included the subnet 192.168.1.0/25.
You have 10 devices in that group 192.168.1.1-10. The rest of the addresses are unused. While running reports on this segment of the network you notice that when a report is run using the entire subnet you see traffic destined for 192.168.1.120. When you run the same report specifying the host group the traffic does not appear. Why is this happening?
If a report table on Cascade Profiler includes the "Server Delay" column but shows no value for "Server Delay" in some cells, what are the possible causes? (Select 3)
Some common protocols which may be observed on a network with visibility tools are listed below. Match the protocol name with the most common port used.
1. HTTP a) TCP/25
2. HTTPS b) TCP/445
3. HTTPS through a proxy c) TCP/443
4. SMTP d) TCP/80
5. CIFS e) TCP/8080
TESTED 04 May 2024